用途特点  USE AND CHARACTERISRICS

     1、本机的所有滑动部位都由液压系统供油润滑，减少磨损，更加延长了机器的使用寿命。
     2、当上压板速下压到裁断作业时会自动慢切，使裁断物上下层之间没有尺寸误差。
     3、本机在设计时结构的变化，让使用者不用担心机器有漏油之虞。
     4、由于电机、油泵外置，其通风冷却条件好，运行安全，寿命长。
     5、刀模设定快捷准确，简单易学。
     6、电机功率小，能耗低。

     1.Oil is supplied to sliding parts of this machine by the hydraulic system for lubrication,reducing wear and prclonging the service life the machine.
     2.The upper platen may autimaticakky cut slowly as it presses down rapidly to the knife mold for cutting so that there will be no dimension errors between the upper and lower layers of the cutting materials.
     3.Structural changes during designing of this machine remove the need for the users to worry about possible oil leakage of the machine.
     4.External motor and oil pump enable good ventilating and cooling conditions,safety operation and prolonged service life.
     5.Setting of the knife mold is rapid,accurate and easy-to-leam.
     6.Small motor power tesults in low power consumption.

技术参数   PARAMETER

型号	Model number	XCLP2-500A	XCLP2-600A	XCLP2-800A	XCLP2-1000A
最大裁断力	Macimum cutting force	500KN	600KN	800KN	1000KN
上压板至工作台面距离	Distance between the upper platen and the working table surface	55-195mm	50-200mm	50-200mm	50-200mm
工作台面积	Area of the working table 750×1600mm	750×1600mm	750×1600mm	750×1600mm	900×1600mm
电机功率	Motor power	3kw	4kw	5.5kw	5.5kw
液压油量	Hydraulic oil quantity	200L	220L	320L	330L
机器重量	Machine weight	300kg	3500kg	3800kg